The Green Dot 2040E5 Board
The "Green Dot 2040E5" Board is a node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 modules from Seeed Studio to do its magic. It also has amazing power management solar charging and battery protection.
AvocAudio: TinyML Board
AvocAudio is a tinyML board designed for extensive audio data collection across various tinyML applications, using Raspberry Pi RP2040 and LoRa-E5 LoRaWAN. It has an SD card slot for local storage and can run on solar power or a lithium-ion battery for efficient energy use.
Brave Power Management Board
Brave is a versatile and efficient power board that can provide 12v, 5v, and 3.3v outputs. Based on a step-up converter MT3608, CN3063 CC/CV charger, a PWM step-down DC/DC converter RT8059GJ5, and a low-loss power distribution switch SY6280A. It can be powered by a battery or solar panel, perfect for edge computing IOT applications.
Scale Snap 3D
3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync.
sEMG-DAQ
sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications.
ESP32 Robot Controller
Control board for autonomous or radio-controlled robots based on ESP32. It has inputs for distance sensors, encoders, or a Flysky RC controller receiver. I2C display to visualize and select configuration modes.
Environmental Exposure Risk Meter
Environmental exposure risk measuring device based on ESP32, ultraviolet light, and CO2 gas sensor modules. It has a voltage booster MT3608 chip and a solar panel for lithium battery charger with MPPT CN3791 chip.
SNES Controller Arduino Nano Shield
Meet the Super Nintendo (SNES) controller port Arduino Nano Shield. This shield is fully equipped to support all types of SNES accessory inputs, like controllers, mice, and multitaps.
Robo Project
The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education.
